If you ask any lash artist what the most frustrating part of a set is, they won't say the mapping or the fanning. They'll say the inner and outer corners.
Those tiny, hidden lashes in the inner corner and the downward-pointing lashes in the outer corner are the difference between a "good" set and a "masterpiece." If you struggle to reach them, your sets will look unfinished, and your symmetry will be off.
Stop fighting the eyelids and start using these Pro Taping Hacks to reach every single lash with ease.
1. The "Inner Corner" Pull (Horizontal)
Inner corner lashes are often buried under the bridge of the nose or tucked into the fold of the lid.
The Hack: Take a small piece of Sensitive Lash Tape. Place one end on the inner corner of the eyelid and gently pull the skin toward the ear/temple.
Why it works: This "stretches" the inner corner, bringing those hidden baby lashes out into the open so you can isolate them vertically without hitting the client's nose with your tweezers.
2. The "Outer Corner" Lift (Horizontal)
Outer corners often droop or overlap with the bottom lashes.
The Hack: Similar to the inner corner, place your tape on the outer corner of the lid and pull gently toward the nose.
Why it works: This separates the outer lashes from each other, making it much easier to see the natural direction of the lash and ensuring you don't accidentally stick the top and bottom lashes together.
3. The "Layering" Lift (Vertical)
Sometimes the issue isn't the corners; it's the sheer volume of lashes in the way.
The Hack: Use a piece of tape to gently lift the top 70% of the lashes upward and secure it to the brow bone. Use your tweezers to "pick out" the bottom-layer lashes from underneath.
Why it works: This is the secret to 100% coverage. By working in layers, you ensure that even the tiniest lashes on the bottom row get an extension, giving the set a much darker, fuller base.
4. The "Bird’s Eye" View
If you’re struggling to see the base of the lash, your client's lid might be "hooded."
The Hack: Place a small piece of tape in the centre of the lid and pull upward toward the brow (just enough to lift the lid, not enough to open the eye!).
Why it works: This exposes the "root" of the lash. If you can't see the root, you can't get a perfect 0.5mm attachment. This hack ensures your bases are flush and comfortable.
BYKALA PRO INSIGHT
The key to taping is tension. You want to move the skin, not open the eye. If the eye pops open even a fraction, the adhesive fumes will cause redness and "chemical burn." Always check with your lash mirror from underneath to make sure the eye is still fully sealed after you apply your tape.
Using high-quality, Sensitive Lash Tape is non-negotiable here. You need something that grips well but won't irritate the delicate skin of the eyelid when you remove it at the end of the set.
